Megapop configuration over ATM (Consumer router - ADSL connection)

Login the router and access to Channel Config

Make sure there is no record under Current ATM VC table.

Add new Channel Configuration 
Default Route selection: Auto
VPI: 8
VCI: 35
Channel Mode: IPoA
Encapsulation: LLC
NAPT: Disable
802.1q: Disable
Local IP address: Customer WAN IP
Remote IP Address: Singtel WAN IP
Netmask: 255.255.255.252

Check and make sure the ATM VC has been setup properly.

Setup LAN Interface

Enable LAN DHCP

Add routing - Advance -> Routing -> Static Routes

Make sure the static route is enable

Lastly, go to maintenance, Save and reboot

Get paid to share your links!