Megapop configuration over ATM (Consumer router - ADSL connection)

Login the router and access to Channel Config

Make sure there is no record under Current ATM VC table.

Add new Channel Configuration 
Default Route selection: Auto
VPI: 8
VCI: 35
Channel Mode: IPoA
Encapsulation: LLC
NAPT: Disable
802.1q: Disable
Local IP address: Customer WAN IP
Remote IP Address: Singtel WAN IP
Netmask: 255.255.255.252

Check and make sure the ATM VC has been setup properly.

Setup LAN Interface

Enable LAN DHCP

Add routing - Advance -> Routing -> Static Routes

Make sure the static route is enable

Lastly, go to maintenance, Save and reboot

Get paid to share your links!

[Solved] one or more activex controls could not be displayed

Problem is shown as below

Step:
1) Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
2) Then u will see some folder under Zones

3) In Zones folder, you may see other folder name with pseudo-graphic number “L” that is out of numeric order.
4) You can just delete the file that is before zone number 0
5) Problem is solved.

**NOTE: Play safe, please backup your registry file before you make any action.

Reference Link:
1) http://social.technet.microsoft.com/Forums/en/w7itprosecurity/thread/90c3202c-448b-42b7-acf7-dab8dba7b000
2) http://blogs.technet.com/b/asiasupp/archive/2011/01/27/quot-one-or-more-activex-controls-could-not-be-displayed-quot-error-when-you-open-mmc-extended-tab.aspx